HP 9836C Technical Computer: Difference between revisions

From Tech Tangents
Jump to navigation Jump to search
No edit summary
 
(12 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{InfoboxDevice|Picture=Hp-9836c-computer.jpg|Release Year=1981|Manufacturer=HP|CPU=Motorola 68000 8MHz|Storage=Dual Internal 5.25" @ 264KB}}
{{InfoboxDevice|Picture=Hp-9836c-computer.jpg|Release Year=1981|Manufacturer=HP|Condition=Working|CPU=Motorola 68000 8MHz|Expansion Interface=HP Series 200 Backplane Card|Storage=Dual Internal 5.25" @ 264KB}}


A high end workstation computer from [[:Category:HP|HP]] in the early 1980s primarily for use with CAD and instrument control using the integrated HP-IB (GP-IB/IEEE-488) interface.
A high end workstation computer from [[:Category:HP|HP]] in the early 1980s primarily for use with CAD and instrument control using the integrated HP-IB (GP-IB/IEEE-488) interface.
Line 10: Line 10:
[[File:9836-tandon-jumpers.jpg|none|thumb|Rear of floppy drive from 9836C showing jumpers and termination pack.]]
[[File:9836-tandon-jumpers.jpg|none|thumb|Rear of floppy drive from 9836C showing jumpers and termination pack.]]


 
For more information on the layout of the data stored on the disks themselves, see the [[HP 82901M 5.25in 270K FDD]] page which is compatible with the internal drives in this system.
Double Density 5.25" disks used in the system are formatted with a LIF filesystem using 33 tracks, 16 sectors per track, and 256 bytes per sector for a total capacity of approximately 270KiB.
[[File:525dd 16sector.png|none|thumb|HxC Disk map of floppy disk for 9836 showing 33 tracks with 16 sectors]]
 
== Repairs - Modifications ==
== Repairs - Modifications ==


Line 19: Line 16:


* Original video cable failed and was replaced with standard male-male DA-15 cable with straight pinout.
* Original video cable failed and was replaced with standard male-male DA-15 cable with straight pinout.
* Computer was originally acquired with a [[HP 98629A Resource Management Card]] which was replaced with a [[HP 98622 GPIO Card]]  since this system will likely never be used with others for the foreseeable future.
* Computer was originally acquired with a [[HP 98629A Resource Management Card]] which was replaced with a [[HP 98622 GPIO Interface|HP 98622 GPIO Card]]  since this system will likely never be used with others for the foreseeable future.
* Floppy drives were disassembled and dry cleaned to remove dust
* Floppy drives were disassembled and dry cleaned to remove dust


Line 33: Line 30:


* [[HP 9122C Dual 1.44MB Floppy Drive]]
* [[HP 9122C Dual 1.44MB Floppy Drive]]
* [[HP 82901M 5.25in 270K FDD]]
* [[:Category:HP Series 200 Backplane Card|HP Series 200 Backplane Cards]]
* [[:Category:HP Series 200 Backplane Card|HP Series 200 Backplane Cards]]
* [[HP 82321A BASIC Language Processor]]


== External Projects and Software ==
== External Projects and Software ==

Latest revision as of 16:27, 26 September 2023

HP 9836C Technical Computer



General Info
Release Year 1981
Manufacturer HP
Condition Working
Technical Specifications
CPU Motorola 68000 8MHz
Expansion Interface HP Series 200 Backplane Card
Categories
Computers
QR Code
(Click for Asset Tag)


A high end workstation computer from HP in the early 1980s primarily for use with CAD and instrument control using the integrated HP-IB (GP-IB/IEEE-488) interface.

Floppy Disk Drives

The internal floppy drives are standard Shugart interface compatible drives, the example I have used Tandon TM200-2A drives, but some units shipped with drives made by Magnetic Peripherals Inc and Control Data as well.

Both of the drives are jumpered at DS0 and MX on U1E as described in the Tandon Manual[1]. A Termination pack is also installed by default in U2F.

Rear of floppy drive from 9836C showing jumpers and termination pack.

For more information on the layout of the data stored on the disks themselves, see the HP 82901M 5.25in 270K FDD page which is compatible with the internal drives in this system.

Repairs - Modifications

2023-06

  • Original video cable failed and was replaced with standard male-male DA-15 cable with straight pinout.
  • Computer was originally acquired with a HP 98629A Resource Management Card which was replaced with a HP 98622 GPIO Card since this system will likely never be used with others for the foreseeable future.
  • Floppy drives were disassembled and dry cleaned to remove dust

Archived Media

Video Appearances

Related Devices

External Projects and Software

External links

  1. Page 26 of "OEM OPERATING AND SERVICE MANUAL TMIOO-l, TMIOO-2 DISK DRIVES 48 TRACKS PER INCH" in the Tandon Manual (archived)