HP 98625 Disc Interface: Difference between revisions
No edit summary |
No edit summary |
||
Line 9: | Line 9: | ||
== Setup Notes == | == Setup Notes == | ||
To access drives connected to the card you will need to load at least the <code>CS80</code> and <code>FHPIB</code> bin files from the BASIC system you are booting from. <code>DCOMM</code> may also be needed or other files, I have not fully tested the minimum requirements or looked for documentation on it. I currently do not know how to access drives from Pascal. | To access drives connected to the card you will need to load at least the <code>CS80</code> and <code>FHPIB</code> bin files from the "Drives" disk from the BASIC system you are booting from. <code>DCOMM</code> may also be needed or other files, I have not fully tested the minimum requirements or looked for documentation on it. I currently do not know how to access drives from Pascal. | ||
== Photos == | == Photos == |
Latest revision as of 21:37, 27 June 2023
General Info | |
---|---|
Manufacturer | HP |
Condition | Working |
Identifiers | |
Model Number | 98625 |
QR Code | |
HP disc interface card for HP Series 200 computers, adds ability to boot from CS80 drives.
Requires HP 98620A DMA Controller to work.
A note, HP calls this a "Disc" interface despite the common standard of "Disk" being used for magnetic media like the Floppy Drives, Hard Drives, and Tape Drives it is meant to be used with. For consistency with existing documentation relating to this device I use "Disc" terminology where applicable.
Setup Notes
To access drives connected to the card you will need to load at least the CS80
and FHPIB
bin files from the "Drives" disk from the BASIC system you are booting from. DCOMM
may also be needed or other files, I have not fully tested the minimum requirements or looked for documentation on it. I currently do not know how to access drives from Pascal.
Photos
-
Rear of card showing HP-IB port for disc drives and default unit select code of 14.